StopTech Front Right Rotor for Corvette

The StopTech Sport Cross-Drilled Disc Brake Rotor, part number 128.62040R, is a direct replacement front right rotor for select Chevrolet Corvette applications. It combines a vented, cross-drilled design with a coated hat finish to support cleaner operation and corrosion resistance.

Built for factory brake systems and stock calipers, this rotor is sized for the Corvette platform and uses a floating disc mounting design with a straight vane layout. The 128.62040R is a practical upgrade for drivers looking for OE-style fitment with a performance-oriented rotor surface.

Key Features

• StopTech Sport Cross-Drilled Disc Brake Rotors line
• Part number 128.62040R
• Front right disc brake rotor
• Vented rotor construction
• X-drilled surface for heat and brake dust dispersal
• Coated hat finish for corrosion protection
• Straight vane internal design
• Direct replacement for factory brake systems and stock calipers
• Outside diameter: 12.008 in. (305.000 mm)
• Nominal thickness: 0.787 in. (20.000 mm)

Product Details

The StopTech Sport Cross-Drilled Disc Brake Rotors line is aimed at drivers who want a rotor that installs in place of the original disc while adding a drilled surface pattern and protective coating. On this 128.62040R rotor, the cross-drilled holes help move heat and brake dust away from the friction surface, reduce pad glazing, and improve bite in wet and dry conditions. The coated hat finish helps resist corrosion, while the high-carbon metallurgy used in most applications supports quieter operation and improved crack resistance.

Fits 1992-1994 Chevrolet Corvette, front right. Fits 1988-1991 Chevrolet Corvette, front right. This part number 128.62040R is listed for Corvette front right applications with standard suspension on 1992-1994 models and without heavy duty suspension on 1988-1991 models.

Common Issues This Rotor Can Address

• Brake fade from heat buildup during repeated stops
• Brake dust accumulation on the rotor surface
• Pad glazing that reduces initial bite
• Corrosion on exposed rotor surfaces
• Reduced wet-weather braking consistency

Installation Notes

Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front right placement and is intended for factory brake systems with stock calipers. Confirm suspension configuration on the Corvette before ordering, since fitment differs between standard suspension and heavy duty suspension applications.

Part number 128.62040R should be matched to the vehicles brake specifications and mounting dimensions for proper fitment.

Quality Assurance

StopTech designs this rotor as a direct replacement brake disc with coated surfaces and high-carbon metallurgy used in most applications for improved durability and crack resistance. The product is built to support consistent braking performance in everyday driving and spirited street use.