Direct Ignition Coil Boot for Mitsubishi Mirage

Standard 3411-1 is a direct ignition coil boot built with a straight boot configuration and silicone insulation for OE-style replacement service. It includes a spring and is made for vehicles that use a direct ignition coil boot at the spark plug connection.

Key Features

• Direct ignition coil boot with straight configuration
• Silicone insulator material and silicone part material
• Includes spring for proper coil-to-plug contact
• OE replacement design for factory-style fitment
• Standard grade type for routine ignition service
• No resistor design
• Length: 4.50 in. (114.30 mm)

Detailed Description

Standard 3411-1 is an OE replacement direct ignition coil boot for ignition systems that use a straight boot layout. The silicone construction helps provide consistent electrical insulation and heat resistance at the coil-to-spark plug interface, while the included spring supports reliable contact transfer. This part number is listed for 2014-2018 Mitsubishi Mirage, 2017-2018 Mitsubishi Mirage G4, and 2015-2016 Dodge Attitude applications. Standard 3411-1 is a practical choice when servicing ignition boots on Mitsubishi Mirage and Mirage G4 models that require a direct ignition coil boot with the specified length and configuration.

Common Issues This Part May Address

• Cracked or heat-damaged ignition coil boot
• Carbon tracking at the coil-to-plug connection
• Misfire caused by worn boot insulation
• Weak electrical transfer between coil and spark plug
• Hard starting or rough running related to ignition boot wear

Installation Notes and Tips

Verify boot length, straight configuration, and OE replacement requirements before installation. Inspect the ignition coil, spark plug well, and plug terminal for corrosion, oil intrusion, or carbon buildup before fitting the new boot. For vehicles in this application group, confirm the correct cylinder-side service location during repair and replace any damaged ignition components at the same time if needed.

Quality Assurance

Standard catalogs this part as an OE replacement ignition boot built to match the original service application. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.