Nissens A/C Compressor for Toyota Applications

The Nissens 891519 A/C compressor is built to OE standards for dependable air conditioning performance in demanding service conditions. It is a direct-fit replacement for select Toyota Camry, Solara, and Celica applications, with design focus on low noise, reduced vibration, and consistent refrigerant pumping.

Compatible with R134A systems and filled with shipping oil only, this compressor uses PAG 46 oil after installation and service preparation. The 10PA17C compressor design, 12V clutch, and serpentine pulley setup support accurate fitment for Toyota A/C compressor replacement needs.

Key Features

• OE-standard Nissens compressor construction for consistent A/C operation
• Part number 891519 for Toyota Camry, Solara, and Celica fitment
• R134A refrigerant type with PAG 46 oil compatibility
• 10PA17C compressor type with clutch included
• 5-groove serpentine pulley with 5.25 in. outside diameter
• 12V electrical connector with 2-pin configuration
• O-rings included and compressor oil filled for shipping

Detailed Description

Nissens 891519 is an OE-style A/C compressor engineered for select Toyota models, including 1986-2001 Toyota Camry, 1999-2001 Toyota Solara, and 1988-1991 and 1993-1999 Toyota Celica. The compressor is designed around critical wear components such as the pulley, clutch, hub, bearing, and wobble plate to support smooth operation, stable pumping output, and controlled noise and vibration levels. This makes it a practical choice for Toyota Camry A/C compressor replacement and Toyota Celica air conditioning service where correct refrigerant system compatibility matters.

This part cross-references Delphi CS20113 for the same application.

Common Problems This Compressor Can Address

• Weak or inconsistent cabin cooling
• Compressor clutch engagement issues
• Excessive A/C system noise or vibration
• Refrigerant pumping loss from worn internal components
• Failure during high-load air conditioning operation

Installation Notes and Tips

• Compressor is filled with shipping oil only; drain and refill with the correct PAG 46 oil before installation.
• Verify the system is set up for R134A refrigerant before service.
• Confirm pulley groove count, connector pin count, and clutch configuration match the vehicle.
• Replace and lubricate O-rings during A/C system assembly as required.
• Flush the system and inspect related components before compressor replacement to reduce repeat failure risk.

Quality Assurance

Nissens manufactures this compressor to OE standards and tests it for performance under high-stress operating conditions. The brands component-level design approach supports durability and consistent operation in Toyota Camry, Toyota Solara, and Toyota Celica A/C service applications.